Piston Seals

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split backups for extrusion resistance, and two split bearing rings. No further support bearings are required.

90A Durometer | Nitrile Material | 3 1/4 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split backups for extrusion resistance, and two split bearing rings. No further support bearings are required.

90A Durometer | Nitrile Material | 3 1/2 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Style PSA-58 piston seals combine a heavy duty, fabric reinforced seal with two polyacetal “L” bearings. This construction allows the seal to withstand pressures up to 5,000 PSI. “L” bearings also react to pressure to prevent extrusion and support the piston. For 2-piece pistons.

Fabric Reinforced Nitrile Material | 7 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split backups for extrusion resistance, and two split bearing rings. No further support bearings are required.

90A Durometer | Nitrile Material | 5 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the “PSC” to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Hercules® Sealing Products also offers a wide base (WB) Style PSC piston seal. These wide base seals have the same characteristics of the standard PSC seals but offer a wider base, eliminating the need to use back-up rings to accommodate wider grooves. Piston diameter “I” dimensions are given for piston without wear rings.

95A; 70A Durometer | Polyurethane Material | 1 1/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the “PSC” to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Hercules® Sealing Products also offers a wide base (WB) Style PSC piston seal. These wide base seals have the same characteristics of the standard PSC seals but offer a wider base, eliminating the need to use back-up rings to accommodate wider grooves. Piston diameter “I” dimensions are given for piston without wear rings.

95A; 70A Durometer | Polyurethane Material | 5 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 7/8 in Nominal Inner Diameter | Piston T-Seal

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 1 1/2 in Nominal Inner Diameter | Piston T-Seal

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 30.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 44.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities