Wipers
Filter Your Search
Category Group
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.
70A Durometer | 660 Bronze; Nitrile Material | 3 in Nominal Inner Diameter | Wiper
Single-lipped, snap-in rod wiper is designed to fit D-style housings.
The ST-XLF wipers are designed to fit the standard ST wiper groove. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal. Developed specifically for use in harsher environments with heavy contamination, such as in agriculture, off-highway, and forestry equipment.
Urethane Material | 5 in Nominal Inner Diameter
Features
- Precision trimmed wiping lip
- Retrofits most ‘D’ wiper housings
- Especially effective in vertically mounted cylinders
- Designed to follow the rod deflection caused by side loads
- Interchangeable with Hallite 520 wiper
- Sharp wiping lip scrapes heavy contamination from rod protecting sealing system
- Umbrella Wiper Technology™ protects housing from contamination and reduces moisture ingress
Medium Duty Buna Wiper with a crush lip providing interference in the groove helping to eliminate contaminants entering through the groove.
Buna-N Material | 1 3/4 in Inner Diameter | Wiper
Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.
70A Durometer | 660 Bronze; Nitrile Material | 1 3/8 in Nominal Inner Diameter | Wiper
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
94A Durometer | Urethane Material | 7 1/2 in Nominal Inner Diameter
Features
- Crush lip to provide extra interference
- Bead on the shoulder to keep contaminants out
- Ribbed ID to prevent pressure traps
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Urethane Material | 2 7/8 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Urethane Material | 6 1/2 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
94A Durometer | Urethane Material | 2 3/8 in Nominal Inner Diameter
Features
- Crush lip to provide extra interference
- Bead on the shoulder to keep contaminants out
- Ribbed ID to prevent pressure traps
