Buffer Seals

This compact rod seal is primarily used as a buffer seal and is often found in construction machinery cylinders. It was developed for use under extreme pressure and where pressure spikes up to 14000 psi are not uncommon.

93A Durometer | Urethane Material | 110 MM Nominal Inner Diameter | Buffer Seal

This compact rod seal is primarily used as a buffer seal and is often found in construction machinery cylinders. It was developed for use under extreme pressure and where pressure spikes up to 14000 psi are not uncommon.

93A Durometer | Urethane Material | 130 MM Nominal Inner Diameter | Buffer Seal

This compact rod seal is primarily used as a buffer seal and is often found in construction machinery cylinders. It was developed for use under extreme pressure and where pressure spikes up to 14000 psi are not uncommon.

93A Durometer | Urethane Material | 140 MM Nominal Inner Diameter | Buffer Seal

This compact rod seal is primarily used as a buffer seal and is often found in construction machinery cylinders. It was developed for use under extreme pressure and where pressure spikes up to 14000 psi are not uncommon.

93A Durometer | Urethane Material | 160 MM Nominal Inner Diameter | Buffer Seal

This compact rod seal is primarily used as a buffer seal and is often found in construction machinery cylinders. It was developed for use under extreme pressure and where pressure spikes up to 14000 psi are not uncommon.

93A Durometer | Urethane Material | 180 MM Nominal Inner Diameter | Buffer Seal

This compact rod seal is primarily used as a buffer seal and is often found in construction machinery cylinders. It was developed for use under extreme pressure and where pressure spikes up to 14000 psi are not uncommon.

93A Durometer | Urethane Material | 200 MM Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Designed to allow for back-pumping capabalities while improving wear resistance and decreasing friction. Can be used as a secondary seal or in tandem with a PTFE buffer seal.

58D; 70A Durometer | Urethane Material | 45 MM Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Designed to allow for back-pumping capabalities while improving wear resistance and decreasing friction. Can be used as a secondary seal or in tandem with a PTFE buffer seal.

58D; 70A Durometer | Urethane Material | 50 MM Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer and nylon anti-extrusion ring, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | PTFE Buffer Material | 105 MM Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer and nylon anti-extrusion ring, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | PTFE Buffer Material | 60 MM Nominal Inner Diameter | Buffer Seal