Pneumatic Seals | CRC Distribution

MUKRN is an asymmetrical single-acting pneumatic rod seal. Molded in nitrile, this seal is resistant to water and most oils while maintaining good low-pressure sealing.

80A Durometer | NBR Material | 42 MM Nominal Inner Diameter | Rod Seal

Features

• Excellent low temperature performance
• Easy installation

Molded in 92A urethane, the MCK53 is a pneumatic cushion seal with specially designed spacer lugs and flow passages to cushion at the end of the stroke in a pneumatic cylinder.

92A Durometer | Urethane Material | 25 MM Nominal Inner Diameter | Cushion Seal

Molded in 92A urethane, the MCK53 is a pneumatic cushion seal with specially designed spacer lugs and flow passages to cushion at the end of the stroke in a pneumatic cylinder.

92A Durometer | Urethane Material | 50 MM Nominal Inner Diameter | Cushion Seal

5/8 Pneumatic Rod Kits, Iron Glands

1-3/8 Pneumatic Rod Kit, Iron Gland

1-3/4 Pneumatic Rod Kit, Iron Gland

Molded in 92A urethane, the MCK53 is a pneumatic cushion seal with specially designed spacer lugs and flow passages to cushion at the end of the stroke in a pneumatic cylinder.

92A Durometer | Urethane Material | 12 MM Nominal Inner Diameter | Cushion Seal

Molded in 92A urethane, the MCK53 is a pneumatic cushion seal with specially designed spacer lugs and flow passages to cushion at the end of the stroke in a pneumatic cylinder.

92A Durometer | Urethane Material | 12 MM Nominal Inner Diameter | Cushion Seal

Molded in 92A urethane, the MCK53 is a pneumatic cushion seal with specially designed spacer lugs and flow passages to cushion at the end of the stroke in a pneumatic cylinder.

92A Durometer | Urethane Material | 14 MM Nominal Inner Diameter | Cushion Seal

Molded in 92A urethane, the MCK53 is a pneumatic cushion seal with specially designed spacer lugs and flow passages to cushion at the end of the stroke in a pneumatic cylinder.

92A Durometer | Urethane Material | 18 MM Nominal Inner Diameter | Cushion Seal