Rod Seals

The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal, with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the, HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains, a critical sealing edge even though increasing pressure moves the line of contact down toward the heel.

92A Durometer | Urethane Material | 5 in Nominal Inner Diameter | 9/32 in Cross Section | U-Seal

Style DRTU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed, with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing., This feature results in reduced leakage, less friction, increased stability, and prevents air and contaminants from, entering the cylinder. This high tear-resistant urethane demonstrates stability throughout a wide range of temperatures., In addition, this material is well suited to mineral and biodegradable hydraulic fluids as well as being resistant to, hydrolysis.

94A Durometer | Urethane Material | 3 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal

These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.

92A Durometer | Urethane Material | 2 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.

92A Durometer | Urethane Material | 1 1/8 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.

92A Durometer | Urethane Material | 4 1/2 in Nominal Inner Diameter | 5/16 in Cross Section | U-Seal

The PU-TDI tandem seal has a urethane sealing lip with a PTFE insert secondary sealing lip. Under increasing pressure, the outer seal acts to compress the PTFE slide ring onto the rod. This action creates a high force sealing edge of low-frictional resistance. These are genuine Hunger® parts.

Urethane Bronze Filled PTFE Material | 40 MM Nominal Inner Diameter | Rod Seal

The PU-TDI tandem seal has a urethane sealing lip with a PTFE insert secondary sealing lip. Under increasing pressure, the outer seal acts to compress the PTFE slide ring onto the rod. This action creates a high force sealing edge of low-frictional resistance. These are genuine Hunger® parts.

Urethane Bronze Filled PTFE Material | 80 MM Nominal Inner Diameter | Rod Seal

The twin lip design helps solve difficult rod sealing problems by providing lower friction, increased stability, and high, dynamic lip force, while preventing air penetration from outside the cylinder.

Asymmetric rod seal designed with precision trimmed sealing lips to provide a dry sealing solution in light and medium-duty applications. The Hallite 605 is molded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance.

Designed to have interference in the seal housing groove and has a secondary lip. The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland. The inner dynamic lip is shorter and more robust to improve sealing and compression set characteristics over conventional, symmetrical U-seals. The seal can be considered for use in heavy-duty applications when used with a suitable full depth back-up ring. The sealing lips are precision trimmed at an angle to give optimal rod sealing performance.

94A Durometer | Urethane Material | 2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

Features

• Excellent low temperature performance
• Easy installation

Rod seal with a hard, split backup ring on each side of the sealing element. Fits a standard o-ring groove. Non-spiraling and extrusion resistant up to 5,000 psi with improved tolerances.

Rod seal with a hard, split backup ring on each side of the sealing element. Fits a standard o-ring groove. Non-spiraling and extrusion resistant up to 5,000 psi with improved tolerances.