Rod Seals

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.

Buna-N Rubber Material | 7 in Nominal Inner Diameter | T-Seal

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.

Buna-N Rubber Material | 7 1/2 in Nominal Inner Diameter | T-Seal

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.

Buna-N Rubber Material | 8 in Nominal Inner Diameter | T-Seal

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.

Buna-N Rubber Material | 9 in Nominal Inner Diameter | T-Seal

12.000 X 13.000 X 0.750 HD Rod Seal

UKR u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded, from polyurethane, UKR u-seals provide long life and high resistance against extrusion. Low friction allows these seals, to run smoothly in a lubricated or non-lucricated cylinder. Available for rod sealing, the flexible dynamic lip provides, very low breakaway friction and steady motion.

90A Durometer | Urethane Material | 1/2 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

Molded from high performance polyurethane, style RTUL rod U-seals feature an expander for good low pressure, sealing. The twin lip feature reduces friction and promotes stability.

95A Durometer | Urethane Material | 8 1/2 in Nominal Inner Diameter | 11/32 in Cross Section | U-Seal

Features

• General purpose rod seal
• Robust design
• Excellent wear resistance
• Increase seal stability
• Performs well over wide temperature range and is extremely effective in low temperatures
• Primary lip protection
• Easy to install

Style RU seals are molded from high quality urethane and designed specifically for rod applications.

90A Durometer | Urethane Material | 2.66 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

Style RU seals are molded from high quality urethane and designed specifically for rod applications.

90A Durometer | Urethane Material | 1 3/4 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal

Style RU seals are molded from high quality urethane and designed specifically for rod applications.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal