Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
HT-2000X1625 has a wall thickness of 0.1875 in. The ID is 1.625 in and the OD is 2 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-4750X3750 has a wall thickness of 0.5 in. The ID is 3.75 in and the OD is 4.75 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-6250X5000 has a wall thickness of 0.625 in. The ID is 5 in and the OD is 6.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-6750X6250 has a wall thickness of 0.25 in. The ID is 6.25 in and the OD is 6.75 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-7500X7000 has a wall thickness of 0.25 in. The ID is 7 in and the OD is 7.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-90X115 has a wall thickness of 12.5 mm. The ID is 90 mm and the OD is 115 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-145X173 has a wall thickness of 14 mm. The ID is 145 mm and the OD is 173 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-10500X9000 has a wall thickness of 0.75 in. The ID is 9 in and the OD is 10.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
HT-8250X7000 has a wall thickness of 0.625 in. The ID is 7 in and the OD is 8.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-105X125 has a wall thickness of 10 mm. The ID is 105 mm and the OD is 125 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
