Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
HT-8000X6500 has a wall thickness of 0.75 in. The ID is 6.5 in and the OD is 8 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-100X120 has a wall thickness of 10 mm. The ID is 100 mm and the OD is 120 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-100X130 has a wall thickness of 15 mm. The ID is 100 mm and the OD is 130 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-105X115 has a wall thickness of 5 mm. The ID is 105 mm and the OD is 115 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-105X125 has a wall thickness of 10 mm. The ID is 105 mm and the OD is 125 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-115X135 has a wall thickness of 10 mm. The ID is 115 mm and the OD is 135 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-140X160 has a wall thickness of 10 mm. The ID is 140 mm and the OD is 160 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-180X200 has a wall thickness of 10 mm. The ID is 180 mm and the OD is 200 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-185X8750 has a wall thickness of 18.625 mm. The ID is 185 mm and the OD is 222.25 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
MHT-225X10000 has a wall thickness of 14.5 mm. The ID is 225 mm and the OD is 254 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
