Search Results
Search Filters
-
Honed Tube x
Filter Your Search
Inside Diameter
Material
Outside Diameter
Unit of Measure
Wall Thickness
Shop by Category
HT-6000X5000 has a wall thickness of 0.5 in. The ID is 5 in and the OD is 6 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $15.07 |
| 15-59 | $13.17 |
| 60-104 | $11.69 |
| 105+ | $10.54 |
HT-3250X2750 has a wall thickness of 0.25 in. The ID is 2.75 in and the OD is 3.25 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.33 |
| 15-59 | $4.58 |
| 60-104 | $4.00 |
| 105-149 | $3.55 |
| 150+ | $3.20 |
HT-5000X4500 has a wall thickness of 0.25 in. The ID is 4.5 in and the OD is 5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.59 |
| 15-29 | $6.52 |
| 30-59 | $5.70 |
| 60-89 | $5.06 |
| 90+ | $4.56 |
MHT-75X95 has a wall thickness of 10 mm. The ID is 75 mm and the OD is 95 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.20 |
| 15-74 | $7.14 |
| 75-104 | $6.44 |
| 105+ | $5.86 |
MHT-80X90 has a wall thickness of 5 mm. The ID is 80 mm and the OD is 90 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $5.86 |
| 15-74 | $4.55 |
| 75-104 | $4.10 |
| 105+ | $3.73 |
HT-2000X1500 has a wall thickness of 0.25 in. The ID is 1.5 in and the OD is 2 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.28 |
| 15-59 | $2.46 |
| 60+ | $1.97 |
MHT-140X166 has a wall thickness of 13 mm. The ID is 140 mm and the OD is 166 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $21.59 |
| 15-44 | $16.76 |
| 45-104 | $15.10 |
| 105+ | $13.74 |
MHT-45X57 has a wall thickness of 6 mm. The ID is 45 mm and the OD is 57 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.64 |
| 15-74 | $5.93 |
| 75-104 | $5.34 |
| 105+ | $4.86 |
HT-2250X1750 has a wall thickness of 0.25 in. The ID is 1.75 in and the OD is 2.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $3.78 |
| 15-59 | $2.84 |
| 60+ | $2.27 |
HT-4000X3250 has a wall thickness of 0.375 in. The ID is 3.25 in and the OD is 4 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.66 |
| 15-59 | $7.44 |
| 60-104 | $6.50 |
| 105-149 | $5.78 |
| 150+ | $5.20 |
