Piston Seals

Manufactured from 55 Shore D polyester reinforced with <5% glass fiber, style PS1704 offers compact, low friction sealing for light to medium duty hydraulic cylinders. Style PS1704 is easily stretched over the piston without needing to be resized as in the PS1400 seals. Directly interchangeable with style PS1400 and PS1500 piston seals. Piston diameter “I” dimensions are given for pistons without wear rings.

70A Durometer | Poly-Trel™ Thermoplastic Material | 5.482 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 15/16 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.

40% Bronze Filled PTFE Material | 2 7/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.

55D Durometer | Glass/PTFE Filled Polyurethane Material | 1.191 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

2.000 X 1.462 X 0.283 Piston Seal

Compact and easy to install, the Style PSA-65 piston seal is a simple and economical design for pressures up to 3,000 PSI. The assembly consists of a nitrile rubber seal and two polyacetal bearings to support the piston. For 1-piece pistons.

Nitrile Material | 1 5/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.

60D & 57A Durometer | Urethane Composite Material | 1 3/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.

60D & 57A Durometer | Urethane Composite Material | 2 5/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 1 1/2 in Nominal Inner Diameter | Piston T-Seal

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 3 1/4 in Nominal Inner Diameter | Piston T-Seal