Buffer Seals
Search in Category
Filter Your Search
Category Group
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.
70A Durometer | Filled PTFE Buffer Material | 22 MM Nominal Inner Diameter | Buffer Seal
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.
70A Durometer | Filled PTFE Buffer Material | 22 MM Nominal Inner Diameter | Buffer Seal
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Designed to allow for back-pumping capabalities while improving wear resistance and decreasing friction. Can be used as a secondary seal or in tandem with a PTFE buffer seal.
58D; 70A Durometer | Urethane Material | 60 MM Nominal Inner Diameter | Buffer Seal
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.
70A Durometer | Filled PTFE Buffer Material | 95 MM Nominal Inner Diameter | Buffer Seal
Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes to protect the rod seal. The unique design relieves back pressure between the buffer and the rod seal. NOTE: ME = Merkel Equivalent.
Urethane Material | 120 MM Nominal Inner Diameter | Buffer Seal
The RBS style rod buffer seals are a rectangular urethane buffer ring designed to absorb pressure fluctuations to protect the primary rod seal. Some sizes include a radial and axial slot, which faces the pressure, to relieve back pressure between the primary and buffer seal. This simple design is commonly found on older construction equipment.
92A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter | Buffer Seal
