Search Results
Filter Your Search
Category Group
Shop by Category
HT-7500X6500 has a wall thickness of 0.5 in. The ID is 6.5 in and the OD is 7.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $20.35 |
| 15-59 | $17.79 |
| 60-89 | $15.80 |
| 90+ | $14.23 |
3.25 in induction hardened chrome shafting.
The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-29 | $21.62 |
| 30-59 | $15.46 |
| 60-119 | $12.00 |
| 120-287 | $10.81 |
| 288+ | $9.84 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70A Durometer | Nitrile Material | 110 MM Nominal Inner Diameter | 5 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
70 Durometer | Buna-N Rubber Material | 5/16 in Cross Section | O-Ring Cord
70 Durometer | Buna-N Rubber Material | 5/16 in Cross Section | O-Ring Cord
Parback® backup ring with a curved cross-section.
Parbaks are contoured on one face to minimize distortion of the o-ring when under pressure. Parbaks should be installed with the contoured face against the o-ring, but reversal does no harm.
90A Durometer | Buna-N Rubber Material | 1 3/8 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- Excellent extrusion resistance
- Easily stretched for installation
- Lubrication is enhanced by rubber which absorbs system fluid and does not plate out on rubbing surfaces
Machined from 1018 Carbon Steel for a 4 in cylinder.
The length is 0.5 in and the lip is 0.25 in in tall.
Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.
Machined from 1018 Carbon Steel for a 5 in cylinder.
The length is 1 in and the lip is 0.375 in in tall.
Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.
660-3000X3500 has a 0.25 in thick wall. The ID is 3 in and the OD is 3.5 in. The material is 660 Bronze Copper Alloy 932.
- Long life span
- Machinability rating of 70
- Not subject to dezincification
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-4 | $19.15 |
| 5-9 | $17.01 |
| 10-14 | $15.32 |
| 15+ | $13.94 |
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 2 7/8 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.
95A Durometer | Urethane Material | 6 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal
