Search Results
Filter Your Search
Category Group
Shop by Category
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
Urethane Material | 40 MM Inner Diameter | Wiper
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 1 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90 Durometer | Buna-N Rubber Material | 1/2 in Nominal Inner Diameter | 1/16 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
Used primarily as an anti-extrusion device for u-seals, these back-up rings combine high performance with very low friction. “ST” suffix designates a split ring.
PTFE Material | 1 in Nominal Inner Diameter | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
MHT-80X95 has a wall thickness of 7.5 mm. The ID is 80 mm and the OD is 95 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.10 |
| 15-74 | $5.51 |
| 75-104 | $4.97 |
| 105+ | $4.52 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 2 5/16 in Nominal Inner Diameter | 3/32 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
HWT-5000X3000 has a wall thickness of 1 in. The ID is 3 in and the OD is 5 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-4 | $12.01 |
| 5-24 | $10.50 |
| 25-49 | $9.32 |
| 50+ | $8.40 |
MCPO-38 has a 38 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $6.00 |
| 15-29 | $4.00 |
| 30-89 | $3.00 |
| 90-134 | $2.66 |
| 135+ | $2.40 |
MHT-125X147 has a wall thickness of 11 mm. The ID is 125 mm and the OD is 147 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $17.41 |
| 15-44 | $13.51 |
| 45-104 | $12.17 |
| 105+ | $11.08 |
