Search Results
Filter Your Search
Category Group
Shop by Category
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 34 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
HT-6000X5000 has a wall thickness of 0.5 in. The ID is 5 in and the OD is 6 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $15.07 |
| 15-59 | $13.17 |
| 60-104 | $11.69 |
| 105+ | $10.54 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 2 7/8 in Nominal Inner Diameter | 3/16 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
HWT-6000X3000 has a wall thickness of 1.5 in. The ID is 3 in and the OD is 6 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-4 | $27.61 |
| 5-14 | $24.13 |
| 15-24 | $21.43 |
| 25-49 | $19.31 |
| 50+ | $17.57 |
MHT-160X190 has a wall thickness of 15 mm. The ID is 160 mm and the OD is 190 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $19.73 |
| 15-44 | $15.31 |
| 45-104 | $13.79 |
| 105+ | $12.55 |
1 in x 4 ft polyester lifting sling with an Endless loop.
HT-5000X4500 has a wall thickness of 0.25 in. The ID is 4.5 in and the OD is 5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.59 |
| 15-29 | $6.52 |
| 30-59 | $5.70 |
| 60-89 | $5.06 |
| 90+ | $4.56 |
MCPO-14 has a 14 mm diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-29 | $3.03 |
| 30-59 | $1.52 |
| 60-89 | $1.30 |
| 90-134 | $1.01 |
| 135+ | $0.91 |
