Search Results
Filter Your Search
Category Group
Shop by Category
Rubber Material | 1 1/2 in Nominal Inner Diameter | Wiper
Rubber Material | 1 1/2 in Nominal Inner Diameter | Wiper
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
MHT-45X57 has a wall thickness of 6 mm. The ID is 45 mm and the OD is 57 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.64 |
| 15-74 | $5.93 |
| 75-104 | $5.34 |
| 105+ | $4.86 |
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90 Durometer | Buna-N Rubber Material | 2 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
HC-4000-12 has a 4.5 in OD and is made to fit a 3.5 in bore cylinder.
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.
HT-4000X3250 has a wall thickness of 0.375 in. The ID is 3.25 in and the OD is 4 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $8.66 |
| 15-59 | $7.44 |
| 60-104 | $6.50 |
| 105-149 | $5.78 |
| 150+ | $5.20 |
Molded from 93 Shore A polyurethane with a 70 Shore A energizer, this seal utilizes the same groove dimensions as a standard o-ring or T-seal. One or two Style 575 back-up rings may be used for wider grooves. Extrusion resistant by design, this seal is also resistant to rolling and twisting. Installation is an easy two step snap-in procedure with no need to re-size before insertion into the bore. Piston diameter “I” dimensions are given for pistons without wear rings.
93A; 70A Durometer | Urethane Material | 2 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Steel Rod Clevis Mount with a 1.25 in – 12 TPI threaded end and a 1.375 in pin hole.
Clevis mounts help maintain alignment and protect the cylinder from side load. Mounts attach to threaded stud ends, pivot holes, or bolt holes on the cylinder. Can be used with hydraulic cylinders with standard bore sizes.
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 4 1/2 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
Urethane Material | 45 MM Inner Diameter | Wiper
